Autoplane Technologies
Request a unit

AutoPlane training

Learn the method in five short lessons. Master it one phase at a time.

Start with five quick-start Method clips: 6–46 seconds each, 1 minute 49 seconds in total. Written phase guidance is available now. In-depth phase walkthroughs and additional phase clips are coming soon.

Your progress

Saved on this device
0 of 6 complete
MethodFillerPrimerClearBlendingCare
Start hereThe Method Start

The phases

One phase at a time

Written guidance now · phase videos coming soon
1 ✓
PHASE 1

Filler

Shape cured filler toward the intended contour, use guide coat and a light long-block check to assess it, then refine the scratches before primer.

Example: P80 → P180
Watch before your first filler job.
2 ✓
PHASE 2

Primer

On cured primer-surfacer, use guide coat before the initial cut, check the contour with light diagnostic block passes, then refine for the next coating.

Example: P400 → P600
Watch before you block primer.
3 ✓
PHASE 3

Clear

On cured clear, choose the least aggressive suitable starting grade and control film removal. Refine scratches, then use the approved buffing and polishing system.

System-specific refinement
Watch before your first clear job.
4 ✓
PHASE 4

Blending

Use controlled, overlapping passes to work toward the intended blend boundary. Match the abrasive and inspection method to the coating stage.

Any phase
Watch once you are comfortable with filler.
5 ✓
PHASE 5

Care and troubleshooting

When to replace the head, heat and aluminum, and the most common mistakes.

Every job
Watch anytime. Rewatch if results change.
Stuck on a job?

Email us a photo of the panel. We answer customers directly.

dante.bernal@autoplanetech.com
Printable quick card

The same method and grit guide as the card in your box.

Download the PDF
30-day guarantee

Use it for 30 days. If it doesn't save you time, we'll refund you.

Terms of Sale